Split Type Hot Water Heat Pump
Econergy
Northland’s hot water heat pump specialists
If you’re building a new home, renovating your current home, or are ready to replace your old hot water cylinder, we supply, install and repair hot water heat pumps to homes and businesses all over Whangarei. From space saving, outdoor hot water heat pumps to split-type hot water heat pumps which can reduce your power bill, you’ll find your ideal water heating solution here. We’re Northland’s specialists in heating and can advise you on the system that works best for your lifestyle and budget.
Up to 50% of your monthly energy bill is for water heating via your hot water cylinder. We all like a strong hot shower or a soak in the bath... until the power bill arrives. And with growing demand, electricity and gas are becoming more and more expensive.
Installing an Econergy to your new or existing hot water cylinder can be the single biggest step toward slashing your power bill.
The Econergy Heat Pump Water Heater delivers the highest seasonal efficiency of any water heater available*. And don't just take our word for it - the Econergy has been rated number one in Consumer Magazine's heat pump water heater test. Econergy is being recognized as one of the best water heating options for your home, even better than gas or solar water heating.
Designed and Manufactured in New Zealand, they exclusively offer a 6-year performance guarantee on our water heaters as well as a 10-year manufacturers warranty.
Why Econergy?
- Significant Cost Savings
- Continuous Hot water
- Faster Hot Water
- Your Home Future Proofed
- Easy Installation
- Environmentally Friendlier
- (COP) Efficiency
- 6-year Performance Guarantee
- Quality New Zealand Manufacturer
Econergy Storage Cylinders are assembled in New Zealand and designed to deliver the best performance from your Econergy heat pump water heater. Cylinders are constructed from corrosion-resistant stainless steel for a long and trouble-free lifespan and meet or exceed NZ Minimum Energy Performance Standards (MEPS) requirements as specified in AS/ NZS 4692:2002.
Proven heat pump technology for continuous hot water and maximum efficiency
Econergy heat pump water heaters are the latest innovation in home water heating. Using proven heat pump water heater technology, the Econergy water heater transfers energy from the surrounding air to heat your homes hot water at a fraction of the cost of an electric element. Our customers are enjoying savings of up to 75%* for this form of solar water heating.
Future proof your home against rising energy costs
Electricity is becoming more and more expensive. The best option to reduce household costs is to become more efficient and use less energy which is exactly what the Econergy heat pump water heater system does.
Get usable hot water faster
Unlike conventional gas or hot water cylinders, the Econergy heat pump water heater uses innovative new technology to heat the tank from the top down. Econergy revolutionary top down heating technology provides you with continuous hot water faster from a cold tank. There’s no need to wait hours until you get usable hot water.
Built for New Zealand conditions
Econergy heat pump water heaters are New Zealand designed and built specific for our house designs and weather conditions to give you the best possible performance. The product comes with a guaranteed minimum 6-year performance warranty at a minimum 66% savings level, fully supported by our New Zealand manufacturing facility and our authorised installers.
Compare with a solar water heater
Quote from EECA Energywise: “Heat pump water heaters are another product on the market and are a form of indirect solar water heating. The sun heats the air around your home each day, and a heat pump water heater shifts some of this heat from the outside air into you hot water. They generally work as well, if not better than solar water heaters, supplying on average $3 of hot water for every $1 of electricity they use.
Heat pump water heaters are also effective in situations where solar water heating is not suitable, such as: houses that don’t get direct sun during the day, or a house where it would be particularly expensive to install a solar hot water system.”
Retrofit or new construction
The Econergy heat pump water heater is an easy retrofit to your existing hot water cylinder or is installed by preference as part of a renovation or building project. If you’re building or renovating or just want to reduce your power bills be sure to ask for Econergy.
The exterior of the cylinder is coloursteel so that the cylinders can be sited outdoors or indoors. Standard cylinder range shown: 180L, 250L & 300L. We can also use custom hot water cylinders of up to 800L capacity which is available upon request.
Econergy Storage Cylinders are assembled in New Zealand and designed to deliver the best performance from your Econergy heat pump water heater.
Cylinders are constructed from corrosion-resistant stainless steel for a long and trouble-free lifespan and meet or exceed NZ Minimum Energy Performance Standards (MEPS) requirements as specified in AS/ NZS 4692:2002. Temperature Sensors are built-in. The exterior of the cylinder is coloursteel so that the cylinders can be sited outdoors or indoors.
Cylinders come with a 10-year manufacturer’s warranty. The standard range is shown below, however, hot water cylinders up to 800L capacity are available upon request. Custom made stainless steel HWCs available upon request.